Auracle shares pop 51% before drill results

Auracle Resources' Mexican Hat gold project in southeastern Arizona, 115 km east of Tucson. Photo by Auracle ResourcesAuracle Resources' Mexican Hat gold project in southeastern Arizona, 115 km east of Tucson. Photo by Auracle Resources

Shares of new Vancouver-based gold explorer Auracle Resources (AAL-V) spiked 51% last week to 46¢ apiece before the company releasing assay results from a first round of drilling at its Mexican Hat gold property in Arizona.

Auracle started a 4,200-metre drill program at the property in mid-October, and by mid-December had completed 15 holes for a total of 2,600 metres.

The program has been designed to re-drill historical drill holes completed by a half-dozen operators at the project since the 1980s, including Placer Dome, as well as test new targets derived from high-grade surface samples.

Last month, Auracle’s management added a second drill to Mexican Hat. One will concentrate on step-out drilling while the other conducts infill drilling to confirm historic data and tighten the drill-hole spacing. Auracle plans to test 1 km of strike length and 200 metres of width.

Rock-chip sampling undertaken prior to the company’s public listing in July generated several follow-up targets. Samples taken along crosscuts of drill access roads on the property returned assays as high as 48 grams gold per tonne over 10 metres, included within a larger section grading 4.23 grams gold over 160 metres.

Auracle’s management says visual observations of new drill core have identified zones of strongly fractured material containing intense hematite and limonite alteration in the majority of holes. It says the alteration indicated gold mineralization in the historic drill programs, as well as earlier rock sampling completed by the company.

A historical, non-National Instrument 43-101-compliant resource estimate by Placer Dome and joint-venture partner Oneida Resources identified six gold-bearing zones at Mexican Hat in 1989. Their target was an open-pit, heap-leachable gold deposit. The six zones delineated over 19,800 metres of drilling combined to 10.3 million tons averaging 0.035 oz. gold per ton for 361,894 contained oz. gold. In metric terms, the resource comprised 9.3 million tonnes averaging 1.08 grams gold.

As a low-sulphidation, epithermal lode gold occurrence, mineralization at Mexican Hat has a controlled structure and occurs in silicified fault zones, shears and pipe-like breccias.

Gold mineralization largely consists of free gold with pyrite, with most of the pyrite having been oxidized, leaving limonite, hematite and goethite.

The property is located in Cochise County in southeastern Arizona, 115 km east of Tucson. Many of the mineral claims fall under federal jurisdiction administered by the United States Bureau of Land Management.

Auracle says access to the property is by all-weather roads and infrastructure in the area is good: water is available from nearby commercial wells, and future power could be provided by a major coal-fired generating plant 25 km to the north.

President and CEO Robin Forshaw, a geologist with over 40 years of mineral exploration experience, helped found Auracle in 2009.

He also helped recruit the company’s largest shareholder, Elgin Mining (ELG-V), a former coal miner turned gold explorer now run by former Kinross exec Bob Buchan. Elgin bought 36%, or 11.8 million shares of the company, for $2.03 million in 2010 when Auracle was still private. Those shares are worth $5.4 million today.

Should first-round drilling at Mexican Hat prove positive, Auracle will likely need to raise more money and dilute its 32 million shares outstanding.

The company had $890,000 in working capital as of Oct. 31, 2011. Its shares rose 14¢ to close at 46¢ on 104,000 shares traded on Jan. 6.

Print

Be the first to comment on "Auracle shares pop 51% before drill results"

Leave a comment

Your email address will not be published.


*


By continuing to browse you agree to our use of cookies. To learn more, click more information

Dear user, please be aware that we use cookies to help users navigate our website content and to help us understand how we can improve the user experience. If you have ideas for how we can improve our services, we’d love to hear from you. Click here to email us. By continuing to browse you agree to our use of cookies. Please see our Privacy & Cookie Usage Policy to learn more.

Close