Century Iron Mines lays out two mine plans

Century Iron Mines and Augyva Mining Resources' Duncan Lake iron ore project in Quebec's James Bay region. Source: Augyva Mining Resources Century Iron Mines and Augyva Mining Resources' Duncan Lake iron ore project in Quebec's James Bay region. Source: Augyva Mining Resources

VANCOUVER — Century Iron Mines (FER-T) has a portfolio full of projects, a fair pile of cash, backing from not one but two Chinese partners and a plan to become a mid-sized iron ore producer within the next few years.

In the last week Century advanced that plan notably, releasing preliminary economic assessments (PEAs) for two of its properties: the small, direct-shipping Joyce Lake project and the large, pellet-producing Duncan Lake project.

Century holds a host of projects, most of which lie in the Labrador Trough. The projects fall within three groups. The Sunny Lake project is at the north end of the trough and includes the Full Moon deposit, home to 7.3 billion indicated tonnes grading 30.18% iron and 8.7 billion inferred tonnes averaging 29.9% iron. Roughly 100 km southeast is Attikamagen, a property that encompasses the Joyce Lake and Hayot deposits. And 75 metres south of Attikamagen are a set of early stage projects that Century acquired from Altius Minerals (ALS-T). Finally there’s Duncan Lake, which is located several hundred kilometres west.

Century’s projects cover a wide size range, as evidenced by the two markedly different PEAs. Joyce Lake carries a net present value (NPV) of $94.5 million, and Duncan Lake’s NPV came in at $4.1 billion. Joyce Lake would operate for four years, and Duncan Lake for 20. These differences, however, simply mean the two projects fit into different slots in Century’s long-term development plan.

The plan is progressive. Century wants to start small by getting a project like Joyce Lake into production before developing a mid-sized operation and then, down the road, embarking on a major build like Duncan Lake.

Joyce Lake seems like a good starting point. It is relatively small for an iron ore project, and since its resource is amenable to direct shipping, it is also pretty straightforward. At the planned operation iron ore would be mined, crushed and screened before being transported by truck and train to the Port of Sept-Îles and loaded onto ships.

Simple means inexpensive, which is why Joyce Lake sits at the top of Century’s list of development projects. Total capital costs at Joyce Lake are estimated at just $96.6 million, an investment that would bring to life an operation producing 2 million tonnes of iron ore lump and sinter fines a year for four years.

Lump iron ore would constitute 35% of the output from Joyce Lake. The other 65% would be sinter fines. On average, it would cost $62.80 to produce each tonne of iron ore.

Using a price of US$108 per tonne for lump iron ore, US$93 per tonne for sinter fines iron ore and an 8% discount rate, Joyce Lake carries a $94.5-million, pre-tax NPV. The project is expected to generate a 35% pre-tax internal rate of return (IRR), which would enable capital payback in 2.9 years.

Century owns 56% of Joyce Lake, and Champion Iron Mines (CHM-T) holds the other 44% of the encompassing Attikamagen property. The property sits on the western margin of the Labrador Trough, a sequence of sedimentary rocks including iron formations, volcanic rocks and mafic intrusions. Joyce Lake is located in Labrador, but its land package straddles the Labrador-Quebec border.

There is no road into Joyce Lake and, at present, no plan to build one. The mine would operate year-round, with ore stockpiled mid-year during the summer months. In the winter, ore would be hauled by truck along an ice bridge stretching across the Iron Arm Bay in Lake Attikamagen. Less than 30 km from the mine, trucks would reach a rail loop and transfer their loads into rail cars.

That’s Joyce Lake: inexpensive, straightforward and sole owned. A few days after releasing the results of its PEA, Century announced results from a second preliminary economic assessment. The second PEA considered the much larger Duncan Lake project, a joint venture with Augyva Mining Resources (AUV-V), which owns 35%.

Duncan Lake is a bit of an outlier amongst Century’s projects, as the only project not located in the Labrador Trough. Instead, Duncan Lake is part of the La Grande greenstone belt in the James Bay region of Quebec. The property is 50 km south of the town of Radisson and 130 km from the east coast of James Bay.

There are six defined deposits at Duncan Lake, though the PEA only considered mining two of them. Economically constrained pits at these two deposits contain a total of 800 million tonnes of resources, enough to support an operation producing 12 million tonnes of pellets each year for 20 years.

To produce all those pellets, the Duncan Lake operation would mine 41 million tonnes of resource grading 24.8% iron each year. The ore would be crushed and fed into one of three concentrator process lines. In the concentrator the crushed ore would be ground and concentrated via magnetic separation twice and then thickened, to produce a concentrate carrying 67.6% iron and 5% silicon dioxide.

Rather than build a pellet plant near the project, the PEA plans for a 135 km pipeline to transport the concentrate from Duncan Lake to the shore of James Bay, near the port at Stromness Island. The pellet plant would turn the concentrate into pellets containing 66.3% iron and 5.1% silicon dioxide.

James Bay is covered in ice eight months of the year, during which time the pellets would be stockpile. Each year’s full complement of pellets would then be shipped out during the annual four-month ice-free period. The port near Stromness Island was selected for this reason: it has sufficient water depths to accommodate cape-size vessels, which would enable Century to ship 12 million tonnes of annual pellet production in the four summer months.

The PEA assumed 70% of the output from Duncan Lake would head to China, with the rest to Europe. An independent consultant recommended that Century use US$169 per tonne in the study as the long-term selling price estimate for Duncan Lake pellets. This price compares favourably with the expected operating cost at Duncan Lake, which came in at $59.17 per tonne.

Duncan Lake needs a good margin, as the project will not be cheap to build. The PEA estimated capital costs at $3.8 billion. The pellet plant alone would cost $1.1 billion.

The project carries a $4.1-billion pre-tax NPV using an 8% discount rate. It would be expected to generate a 20.1% pre-tax IRR, which would repay capital costs in 4.2 years.

At the end of 2012 Century had $44 million in the bank. The company has 95 million shares outstanding and 105 million fully diluted, but only 16% of those shares are free trading. Founding shareholders and management hold 54% of Century’s stock and have entered into voluntary lock-up agreements. Major Chinese steel producer Wuhan Iron and Steel Co. holds another 25% of Century’s outstanding count, while China Minmetals owns 5%.

However, a limited free-trading float has not prevented the company’s share price from sliding. A year ago Century shares were worth $2. At press time the shares traded near 33¢.

Print

Be the first to comment on "Century Iron Mines lays out two mine plans"

Leave a comment

Your email address will not be published.


*


By continuing to browse you agree to our use of cookies. To learn more, click more information

Dear user, please be aware that we use cookies to help users navigate our website content and to help us understand how we can improve the user experience. If you have ideas for how we can improve our services, we’d love to hear from you. Click here to email us. By continuing to browse you agree to our use of cookies. Please see our Privacy & Cookie Usage Policy to learn more.

Close