Northern Dynasty eyes a bigger Pebble

Summer drilling on Northern Dynasty Minerals' Pebble copper-gold project, situated 380 km southwest of Anchorage, Alaska. Drilling recently discovered the East zone, where grades are exceeding those of the project's main deposit, immediately west.

Summer drilling on Northern Dynasty Minerals' Pebble copper-gold project, situated 380 km southwest of Anchorage, Alaska. Drilling recently discovered the East zone, where grades are exceeding those of the project's main deposit, immediately west.

A successful drilling campaign in 2005 has prompted Hunter-Dickinson-led junior Northern Dynasty Minerals (NDM-V, NAK-Q) to delay completion of a feasibility study of its Pebble copper-gold deposit, 380 km southwest of Anchorage, Alaska.

The delay comes compliments of the newly discovered East zone, where grades are exceeding those of the project’s main deposit immediately to the west. The company is currently working the new zone into the project’s feasibility study and environmental applications.

The results from last batch of four holes sunk on the East zone in 2005 are as follows:

– hole 5334 — 279 metres grading 0.62% copper, 0.02% molybdenum, and 1.06 grams gold per tonne;

– hole 5335 — 755.8 metres running 0.81% copper 0.02% moly, and 0.44 gram gold;

– hole 5336 — 788.1 metres of 0.67% copper, 0.055% moly, and 0.23 gram gold, including a 197-metre interval of 0.85% copper, 0.05% moly, and 0.33 gram gold; and

– hole 5337 — 618.5 metres grading 0.83% copper, 0.04% moly, and 0.34 gram gold, including 231 metres of 1.25% copper, 0.04% moly, and 0.37 gram gold.

The company notes that these results, combined with 12 previously drilled and reported holes, “indicate the new porphyry system hosts a substantial volume of mineralized material with excellent copper, gold and molybdenum grades.”

In all, 16 widely spaced holes on the East zone generally returned 0.37-1.7% copper, 0.01-0.05% moly, and 0.11-1.3 grams gold over widths varying from 36-80 metres. The holes tested the zone to depths of around 600 metres, with most terminated while still cutting mineralization owing to drill rig limitations.

The zone remains open at depth and in all lateral directions. An initial resource estimate is expected early this year. The company will also begin a 4-rig, deep-drilling program aimed at fully delineating the zone in March.

Pebble’s main deposit is home to measured and indicated resources totalling 1.6 billion tonnes running 0.35% copper, 0.39 grams gold per tonne and 0.018% moly (or 0.69% copper-equivalent). That translates to 12.7 billion lbs. contained copper, 20.5 million oz. gold, and 629 million lbs. moly.

Another 417 million tonnes of inferred material runs 0.31% copper, 0.42 grams gold and 0.018% moly (0.67% copper-equivalent) — for 2.9 billion lbs. copper, 5.6 million oz. gold and 168 million lbs. moly.

The estimates are based on nearly 90,000 metres worth of drilling, and employ a cutoff grade of 0.5% copper-equivalent based on prices of US$1 per lb. copper, US$400 per oz. gold, and US$6 per lb. molybdenum.

Employing a cutoff of 0.7% copper-equivalent defines a high-grade measured and indicated resource totalling 569 million tonnes of 0.46% copper, 0.5 gram gold and 0.021% moly (or 0.88% copper-equivalent), plus an inferred resource of 143 million tonnes grading 0.4% copper, 0.56 gram gold, and 0.02% moly (0.85% copper-equivalent).

North Dynasty envisages eventually exploiting the main deposit via an open pit, followed by a possible underground mining phase to target the remaining deeper mineralization.

The Pebble project is situated about 95 km from tidewater on Cook Inlet. The company plans to apply for environmental permits next year. While some environmental groups are opposed to the project’s development, other Alaskans support it. The company says its goal is to permit the optimum project “with full consideration to all socioeconomic, environmental and economic factors.”

Print

Be the first to comment on "Northern Dynasty eyes a bigger Pebble"

Leave a comment

Your email address will not be published.


*


By continuing to browse you agree to our use of cookies. To learn more, click more information

Dear user, please be aware that we use cookies to help users navigate our website content and to help us understand how we can improve the user experience. If you have ideas for how we can improve our services, we’d love to hear from you. Click here to email us. By continuing to browse you agree to our use of cookies. Please see our Privacy & Cookie Usage Policy to learn more.

Close